| Q1. |
Which countries of map can be
supported ? |
| Ans: |
It’s
well designed for map of all the country followed the
protocol “NMEA 0183”, but we suggest that the datum of
map software is better in “WGS 84”. |
| |
Back
to top |
| Q2. |
Do I need software/driver
to install GPS Receiver on my laptop
? |
| Ans: |
Yes,
we will provide the software/driver in the whole
package, and also CF-type GPS will have the CF to PCMCIA
adaptor as an option. (However some PCMCIA interface
card in laptop only support memory card and WLAN card,
please check the manual of the laptop before use
it.) |
| |
|
| Q3. |
Does it work with Palm, Pocket
PC and Smart Phone ? |
| Ans: |
ezGPS Mouse-type GPS Receiver works with all the
three operation system. While Bluetooth and CF-type GPS
Receiver
work with only Pocket PC and Smart Phone
system. (Please check the specification of PS-1200 for
all the PDA adapter.) |
| |
Back
to top |
| Q4. |
Where can I get the map
software ? |
| Ans: |
We
suggest that you can visit the Micro-Soft website and
search the “AutoRoute” or other local vendors, such as
TomTom, ...etc., it is allowed you to pay and
download the map software of all the country in the
world. |
| |
|
| Q5. |
How long can I use the GPS
Combined with display device without recharge
? |
| Ans: |
It
depends on the power capacity of your devices, moreover
GPS
Receiver is the
minimam power consumption in the world,
it is around
33mA at 3.3volts. |
| |
Back
to top |
| Q6. |
What kind of chipset goes
with the
GPS
Receiver ? |
| Ans: |
Different from the normal GPS CF Receiver for the
other companies, we give up the “SiRf” chipset, and
choice the “Xemics”
and "Nemerix" Chipset from
Switzerland, because of the low power consumption (33mA
approximately) and the tracking
sensitivity
(-152dBm) is the best. |
| |
|
| Q7. |
If I am going to have a
trip in the other country, how can I use my GPS to get
the new position ? |
| Ans: |
GPS
stores the satellite data in the internal memory. If you
have not used GPS for a while or have traveled a long
distance,
and for the PS-3100, please remove the
battery for 5 mins, and let the GPS
reset. |
| |
|
| Q8. |
Some XP users have reported that if a GPS
mouse is plugged in to a serial port while XP is
booting,
the mouse pointer jumps all over the
screen. |
| Ans: |
You may have
to do the following:
| Right click
My Computer |
| Select
Properties |
| Select Advanced
Tab |
| Select Settings in
Startup and Recovery |
| Select Edit
|
add /NoSerialMouse
(this is case sensitive so add it exactly as
shown here) to the line that looks
like:
multi(0)disk(0)rdisk(0)partition(2)\XP="Windows
XP" /fastdetect
so that it now reads:
multi(0)disk(0)rdisk(0)partition(2)\XP="Windows
XP" /fastdetect/NoSerialMouse |
| File -> Exit Save
yes |
| OK |
| and reboot
|
THE "CAPN"
IS NOT RESPONSIBLE FOR ABOVE PROCEDURE
CONFIGURATION
PLEASE CONTACT YOUR PC HARDWARE
MANUFACTURER FOR FURTHER INSTRUCTIONS
|
|
| Q9. |
What the LED indicators on
the PS-3100 Bluetooth GPS Receiver
means? |
| Ans: |
LED1 (lift-hand side) :
a. Red flashing light
indicates GPS tracking function has been activated
b. Orange light indicates BLUETOOTH GPS is being
charged.
c. Green light, while flashing, indicates
battery low, steady indicates battery fully charged.
LED2 (right-hand
side) :
Blue light, flashing swiftly signals
pairing,
Blue light, flashing once a second signals
PDA/PC and BLUETOOTH GPS has been connected;
Blue
light, flashing every 3 seconds signals connection
failed.
|
| Q10. |
Which COM port to be
selected for the navigator software, for example:
TomTom? |
| Ans: |
1. Try using
some of the generic receiver choices in the TomTom
software first or
2. Set the port
as NMEA 0183 v3.0 Bluetooth or Bluetooth Serial Port
COM6.
|
| Q11. |
When I connect my XDA II
by using Bluetooth with PS-3100, I find it's not support
SSP profile,
so that I can't select the COM
port? |
| Ans: |
Please check the following
link to download latest driver for your XDA II to solve
this problem.
http://www.bluetooth.jazztel.es/ |
| Q12. |
The Bluetooth GPS can not
paired after the battery is completely
drained. |
| Ans: |
When the battery is completed
drained, the unique pairing ID is lost. Please delete
the Bluetooth GPS shortcut and
the paired device
from the Bluetooth Manager, restart the host device, and
re-pair the Bluetooth GPS again. |
| |
Back
to top |